NMDeviceWifi

NMDeviceWifi

Functions

Properties

Signals

void access-point-added Run First
void access-point-removed Run First

Types and Values

Object Hierarchy

    GObject
    ╰── NMObject
        ╰── NMDevice
            ╰── NMDeviceWifi

Description

Functions

nm_device_wifi_get_hw_address ()

const char *
nm_device_wifi_get_hw_address (NMDeviceWifi *device);

nm_device_wifi_get_hw_address has been deprecated since version 1.24 and should not be used in newly-written code.

Use nm_device_get_hw_address() instead.

Gets the actual hardware (MAC) address of the NMDeviceWifi

[skip]

Parameters

device

a NMDeviceWifi

 

Returns

the actual hardware address. This is the internal string used by the device, and must not be modified.


nm_device_wifi_get_permanent_hw_address ()

const char *
nm_device_wifi_get_permanent_hw_address
                               (NMDeviceWifi *device);

Gets the permanent hardware (MAC) address of the NMDeviceWifi

Parameters

device

a NMDeviceWifi

 

Returns

the permanent hardware address. This is the internal string used by the device, and must not be modified.


nm_device_wifi_get_mode ()

NM80211Mode
nm_device_wifi_get_mode (NMDeviceWifi *device);

Gets the NMDeviceWifi mode.

Parameters

device

a NMDeviceWifi

 

Returns

the mode


nm_device_wifi_get_bitrate ()

guint32
nm_device_wifi_get_bitrate (NMDeviceWifi *device);

Gets the bit rate of the NMDeviceWifi in kbit/s.

Parameters

device

a NMDeviceWifi

 

Returns

the bit rate (kbit/s)


nm_device_wifi_get_capabilities ()

NMDeviceWifiCapabilities
nm_device_wifi_get_capabilities (NMDeviceWifi *device);

Gets the Wi-Fi capabilities of the NMDeviceWifi.

Parameters

device

a NMDeviceWifi

 

Returns

the capabilities


nm_device_wifi_get_active_access_point ()

NMAccessPoint *
nm_device_wifi_get_active_access_point
                               (NMDeviceWifi *device);

Gets the active NMAccessPoint.

Parameters

device

a NMDeviceWifi

 

Returns

the access point or NULL if none is active.

[transfer none]


nm_device_wifi_get_access_point_by_path ()

NMAccessPoint *
nm_device_wifi_get_access_point_by_path
                               (NMDeviceWifi *device,
                                const char *path);

Gets a NMAccessPoint by path.

Parameters

device

a NMDeviceWifi

 

path

the object path of the access point

 

Returns

the access point or NULL if none is found.

[transfer none]


nm_device_wifi_get_access_points ()

const GPtrArray *
nm_device_wifi_get_access_points (NMDeviceWifi *device);

Gets all the scanned access points of the NMDeviceWifi.

Parameters

device

a NMDeviceWifi

 

Returns

a GPtrArray containing all the scanned NMAccessPoints. The returned array is owned by the client and should not be modified.

[element-type NMAccessPoint]


nm_device_wifi_get_last_scan ()

gint64
nm_device_wifi_get_last_scan (NMDeviceWifi *device);

Returns the timestamp (in CLOCK_BOOTTIME milliseconds) for the last finished network scan. A value of -1 means the device never scanned for access points.

Use nm_utils_get_timestamp_msec() to obtain current time value suitable for comparing to this value.

Parameters

device

a NMDeviceWifi

 

Returns

the last scan time in milliseconds (in clock_gettime(CLOCK_BOOTTIME) scale).

Since: 1.12


nm_device_wifi_request_scan ()

gboolean
nm_device_wifi_request_scan (NMDeviceWifi *device,
                             GCancellable *cancellable,
                             GError **error);

nm_device_wifi_request_scan has been deprecated since version 1.22 and should not be used in newly-written code.

Use nm_device_wifi_request_scan_async() or GDBusConnection.

Request NM to scan for access points on device . Note that the function returns immediately after requesting the scan, and it may take some time after that for the scan to complete.

Parameters

device

a NMDeviceWifi

 

cancellable

a GCancellable, or NULL

 

error

location for a GError, or NULL

 

Returns

TRUE on success, FALSE on error, in which case error will be set.


nm_device_wifi_request_scan_options ()

gboolean
nm_device_wifi_request_scan_options (NMDeviceWifi *device,
                                     GVariant *options,
                                     GCancellable *cancellable,
                                     GError **error);

nm_device_wifi_request_scan_options has been deprecated since version 1.22 and should not be used in newly-written code.

Use nm_device_wifi_request_scan_options_async() or GDBusConnection.

Request NM to scan for access points on device . Note that the function returns immediately after requesting the scan, and it may take some time after that for the scan to complete. This is the same as nm_device_wifi_request_scan except it accepts options for the scanning. The argument is the dictionary passed to RequestScan() D-Bus call. Valid options inside the dictionary are: 'ssids' => array of SSIDs (saay)

Parameters

device

a NMDeviceWifi

 

options

dictionary with options for RequestScan(), or NULL

 

cancellable

a GCancellable, or NULL

 

error

location for a GError, or NULL

 

Returns

TRUE on success, FALSE on error, in which case error will be set.

Since: 1.2


nm_device_wifi_request_scan_async ()

void
nm_device_wifi_request_scan_async (NMDeviceWifi *device,
                                   GCancellable *cancellable,
                                   GAsyncReadyCallback callback,
                                   gpointer user_data);

Request NM to scan for access points on device . Note that callback will be called immediately after requesting the scan, and it may take some time after that for the scan to complete.

Parameters

device

a NMDeviceWifi

 

cancellable

a GCancellable, or NULL

 

callback

callback to be called when the scan has been requested

 

user_data

caller-specific data passed to callback

 

nm_device_wifi_request_scan_options_async ()

void
nm_device_wifi_request_scan_options_async
                               (NMDeviceWifi *device,
                                GVariant *options,
                                GCancellable *cancellable,
                                GAsyncReadyCallback callback,
                                gpointer user_data);

Request NM to scan for access points on device . Note that callback will be called immediately after requesting the scan, and it may take some time after that for the scan to complete. This is the same as nm_device_wifi_request_scan_async except it accepts options for the scanning. The argument is the dictionary passed to RequestScan() D-Bus call. Valid options inside the dictionary are: 'ssids' => array of SSIDs (saay)

To complete the request call nm_device_wifi_request_scan_finish().

Parameters

device

a NMDeviceWifi

 

options

dictionary with options for RequestScan(), or NULL

 

cancellable

a GCancellable, or NULL

 

callback

callback to be called when the scan has been requested

 

user_data

caller-specific data passed to callback

 

Since: 1.2


nm_device_wifi_request_scan_finish ()

gboolean
nm_device_wifi_request_scan_finish (NMDeviceWifi *device,
                                    GAsyncResult *result,
                                    GError **error);

Gets the result of a call to nm_device_wifi_request_scan_async() and nm_device_wifi_request_scan_options_async().

Parameters

device

a NMDeviceWifi

 

result

the result passed to the GAsyncReadyCallback

 

error

location for a GError, or NULL

 

Returns

TRUE on success, FALSE on error, in which case error will be set.

Types and Values

NM_DEVICE_WIFI_HW_ADDRESS

#define NM_DEVICE_WIFI_HW_ADDRESS           "hw-address"

NM_DEVICE_WIFI_PERMANENT_HW_ADDRESS

#define NM_DEVICE_WIFI_PERMANENT_HW_ADDRESS "perm-hw-address"

NM_DEVICE_WIFI_MODE

#define NM_DEVICE_WIFI_MODE                 "mode"

NM_DEVICE_WIFI_BITRATE

#define NM_DEVICE_WIFI_BITRATE              "bitrate"

NM_DEVICE_WIFI_ACTIVE_ACCESS_POINT

#define NM_DEVICE_WIFI_ACTIVE_ACCESS_POINT  "active-access-point"

NM_DEVICE_WIFI_CAPABILITIES

#define NM_DEVICE_WIFI_CAPABILITIES         "wireless-capabilities"

NM_DEVICE_WIFI_ACCESS_POINTS

#define NM_DEVICE_WIFI_ACCESS_POINTS        "access-points"

NM_DEVICE_WIFI_LAST_SCAN

#define NM_DEVICE_WIFI_LAST_SCAN            "last-scan"

NMDeviceWifi

typedef struct _NMDeviceWifi NMDeviceWifi;

Property Details

The “access-points” property

  “access-points”            GPtrArray *

List of all Wi-Fi access points the device can see.

[type GPtrArray(NMAccessPoint)]

Owner: NMDeviceWifi

Flags: Read


The “active-access-point” property

  “active-access-point”      NMAccessPoint *

The active NMAccessPoint of the device.

Owner: NMDeviceWifi

Flags: Read


The “bitrate” property

  “bitrate”                  guint

The bit rate of the device in kbit/s.

Owner: NMDeviceWifi

Flags: Read

Default value: 0


The “last-scan” property

  “last-scan”                gint64

The timestamp (in CLOCK_BOOTTIME seconds) for the last finished network scan. A value of -1 means the device never scanned for access points.

Owner: NMDeviceWifi

Flags: Read

Allowed values: >= -1

Default value: -1

Since: 1.12


The “mode” property

  “mode”                     NM80211Mode

The mode of the device.

Owner: NMDeviceWifi

Flags: Read

Default value: NM_802_11_MODE_UNKNOWN


The “perm-hw-address” property

  “perm-hw-address”          char *

The hardware (MAC) address of the device.

Owner: NMDeviceWifi

Flags: Read

Default value: NULL


The “wireless-capabilities” property

  “wireless-capabilities”    NMDeviceWifiCapabilities

The wireless capabilities of the device.

Owner: NMDeviceWifi

Flags: Read

Signal Details

The “access-point-added” signal

void
user_function (NMDeviceWifi *device,
               GObject      *ap,
               gpointer      user_data)

Notifies that a NMAccessPoint is added to the Wi-Fi device.

Parameters

device

the Wi-Fi device that received the signal

 

ap

the new access point

 

user_data

user data set when the signal handler was connected.

 

Flags: Run First


The “access-point-removed” signal

void
user_function (NMDeviceWifi *device,
               GObject      *ap,
               gpointer      user_data)

Notifies that a NMAccessPoint is removed from the Wi-Fi device.

Parameters

device

the Wi-Fi device that received the signal

 

ap

the removed access point

 

user_data

user data set when the signal handler was connected.

 

Flags: Run First